Quality spare center has expertise in shot blasting domain; as per the name of our company we offer excellent quality Tumb Blast Machine which is rugged in design. This machine is widely used in various industries in order to provide clean and finished surfaces. Our offered machine is efficiently manufactured by making use of optimum grade components which is procured from the trusted vendors of the market in adherence with set quality standard of the machine. Also, this Tumb Blast Machine is made availab
The Tumb Type Shot Blasting machine can be used to remove sand and rust from cast, forged and welded parts as well as aluminum and other non-ferrous parts. This series is especially effective for hard-to-clean parts, non-fragile parts and non-core castings. These machines are also available in full automation.
Tumb-type shot blasting machine offers reasonable structure, low energy consumption and high efficiency. The blast chamber is equipped with wear protection plate on the inner wall to avoid punctures due to shots at the high velocity. The rubber belt conveyor allows easy tumbling of work pieces and has many shot leakage holes for the cycle of balls.
Machine is used for surface cleaning, removing dust and surface intensification differently with small and middle sized cast or forged work pieces. The addition of a repeated conveyor allows for increased production rates when it is used as a part of production line.
Wheel description- Quality Spare center’s Tumb-type shot blasting machine is an efficient product, its blasting wheels made with high technology. The wheel blades are durable & it has very negligible maintenance, it can also easily assemble and disassemble. The special shot distributor design contributes to low power consumption and high shot flow rate. It also provide a better work environment to operators, our shot blasting machine strong has double dust remover and extra-large particles to settle first based on the inertia principle, and other is also filtered by the bag type dust collector.
Rubber belts description- In the processing of the machine; it has good wear-resistance rubber and multilayer strengthening cloth. That carriers work piece and working by rolling. Machine has many rubber edges that is about to make work piece roll easily and leakage holes in it, that would make steel shots circulate. The tight shaft is to adjust tight force of the belt.
The Tumb Type Shot Blasting Series can be used for surface cleaning, removing rust and surface intensification of various small and middle sized cast or forged work pieces. The addition of a continuous conveyor allows for increased production rates when used as part of a production line.
|DESCRIPTION / MODEL||AFT-2||AFT-5||AFT-7||AFT-14|
|SIZE||INCHES||20 x 27||27 x 36||36 x 42||45 x 60|
|mm||508 x 686||686 x 914||914 x 1067||1143 x 1524|
|Work Load Capacity||(kg.)||150||250||400||800|
|Impleller Wheel Dia||MM||300||380||500||500|
|Power of Wheel||(HP)||5||10||15||15|
|Throught (Shot Flow Rate)||kg./min.||150||250||300||300|
|Total Power Load||H.P.||11||18.5||28.5||36|